Explanation

• Brass (Handles): Used for handles because it is corrosion-resistant.
• Handles feature a swivel joint to prevent the chain from twisting

Additional information

• Steel (Links): Used for the links and rings, not the handles
• Measurement: The total chain length is measured from the outside edge of one brass handle to the outside edge of the other.

Explanation

• A 20 m metric chain has 100 links.
• Therefore, the length of each link is 20 cm.
• Each link is connected by small rings.
• Metric chains are commonly used in land surveying.

Explanation

• An invitation to contractors to do works or supply materials, with a time limit and total cost, is called a tender

Additional information

• Estimate: Preliminary cost calculation.
• Contract: Signed legal agreement
• Specification: Detailed material and work requirements

Explanation

• Work-charged works: Paid directly from the specific project's funds.

Additional information

• Deposit works: Funded by an external agency or depositor.
• Annual works: Routine, yearly maintenance tasks.
• Departmental works: Executed directly by the government department's own labor.

Explanation

• An accident caused by a short-circuit of electricity is called a fire accident
• Because electrical faults produce sparks and heat that start fires.

Additional information:

Accident Types

• Mechanical: Caused by moving parts or machinery.
• Chemical: Caused by dangerous substances or toxic leaks
• Natural: Caused by weather or earth movements.

Explanation

• Curing: Keeping concrete moist to ensure full strength development.

Additional information 

• Compaction: Removing trapped air bubbles to densify the mix.
• Mixing: Blending cement, aggregates, and water into a uniform paste
• Finishing: Levelling and smoothing the concrete surface after placement.

Explanation

• Merchant ships: 0.30 to 1.00 m (provides a stable but comfortable roll for crew and cargo).

Additional information

• Sailing ships: 0.45 to 1.25 m (higher values help resist wind forces on sails).
• Warships / Battleships: 1.00 to 1.50 m (higher stability ensures safety even after taking damage).
• River crafts: Up to 3.50 m (very high values due to shallow drafts and wide configurations)

Explanation

• Ratio: 4:1 is the standard (range: 3:1 to 5:1).
• Purpose: Prevents short-circuiting and ensures uniform water flow.

Explanation

 Canal Bank Terms

• Spoil bank: Piles of surplus excavated soil.
• Canal bank: Main embankment to hold water.
• Guide bank: Directs river flow through structures.
• Marginal bank: Levee to prevent flood spilling.

Explanation

•  Bleeding: Heavier solids settle down, pushing free water to the surface.

Additional information

• Segregation: The general separation of concrete mix components.
• Compaction: Mechanical shaking or packing to remove trapped air.
• Shrinkage: Volume reduction as concrete dries and hardens over time.