Explanation

The ultimate stress point represents the maximum stress a material can withstand before necking begins.

Beyond this point, the specimen’s cross-section starts reducing until fracture.

Necking begins at the ultimate stress point on the stress-strain curve.

Explanation

Toughness is the ability of a material to absorb energy and deform plastically without fracturing.

It combines strength and ductility, indicating resistance to fracture under impact.

Toughness measures energy absorption before failure.

Explanation

Dimensional quantities have units; shear stress has units of pressure (N/m² or Pa).

Shear stress is a dimensional physical quantity with SI units of pressure.

Explanation

Steel is most elastic among the rubber, steel, glass and sponge.

Steel having the most steep linear stress-strain curve among all.

A stiffer material will have a higher elastic modulus.

Explanation

Friction depends on surface roughness and nature of materials; wet surfaces reduce friction.

Rubber on wet concrete has a much lower friction coefficient compared to dry or metallic surfaces.

Wet surfaces reduce friction significantly.

Explanation

Apparent weight = Normal force; when a lift accelerates downward, the normal force decreases.

If the lift moves downward with acceleration a, apparent weight = W−ma, which is less than the real weight.

Downward acceleration reduces apparent weight.

Explanation

Impulse J=F⋅Δt represents the change in momentum of an object.

It is directly proportional to the force applied and the time duration of application.

Impulse measures the effect of force over a time interval.

Explanation

Both energy and work have SI units of joule (kg·m²/s²).

Work done is a way of transferring energy from one body to another.

Energy and work are dimensionally identical.

Explanation

A floating object arranges itself to reach stable equilibrium, minimizing potential energy.

For a table, the center of buoyancy below the center of gravity makes it float legs upwards.

Floating objects orient to achieve stable equilibrium.

Explanation

According to Archimedes’ principle, the buoyant force acts vertically upward through the center of the displaced fluid.

This point is called the center of buoyancy and determines stability of floating bodies.

Buoyant force always acts through the centroid of the displaced liquid.